Atomic understanding of Kelvin–Helmholtz instability at single-crystal copper interface with an initial corrugated disturbance under different tangential velocities

Shi Jianhao; Wang Xi; Hu Xiaomian; Wu Zihui; Pan Hao

doi:10.1063/5.0290672

Volume 11 Issue 3

May 2026

Turn off MathJax

Article Contents

Article Navigation > Matter and Radiation at Extremes > 2026 > 11(3): 037601

Shi Jianhao, Wang Xi, Hu Xiaomian, Wu Zihui, Pan Hao. Atomic understanding of Kelvin–Helmholtz instability at single-crystal copper interface with an initial corrugated disturbance under different tangential velocities[J]. Matter and Radiation at Extremes, 2026, 11(3): 037601. doi: 10.1063/5.0290672

Citation:

Shi Jianhao, Wang Xi, Hu Xiaomian, Wu Zihui, Pan Hao. Atomic understanding of Kelvin–Helmholtz instability at single-crystal copper interface with an initial corrugated disturbance under different tangential velocities[J]. Matter and Radiation at Extremes, 2026, 11(3): 037601. doi: 10.1063/5.0290672

Citation:

Shi Jianhao, Wang Xi, Hu Xiaomian, Wu Zihui, Pan Hao. Atomic understanding of Kelvin–Helmholtz instability at single-crystal copper interface with an initial corrugated disturbance under different tangential velocities[J]. Matter and Radiation at Extremes, 2026, 11(3): 037601. doi: 10.1063/5.0290672

PDF( 22762 KB)

Atomic understanding of Kelvin–Helmholtz instability at single-crystal copper interface with an initial corrugated disturbance under different tangential velocities

doi: 10.1063/5.0290672

Shi Jianhao^{1, 2
,},
Wang Xi^{1
,
,
,},
Hu Xiaomian¹,
Wu Zihui¹,
Pan Hao^{1, 3
,
,}

1.
Institute of Applied Physics and Computational Mathematics, Beijing 100094, People’s Republic of China
2.
Graduate School of China Academy of Engineering Physics, Beijing 100088, People’s Republic of China
3.
Center for Applied Physics and Technology, Peking University, Beijing 100871, People’s Republic of China

More Information

Corresponding author: a)Authors to whom correspondence should be addressed: wang_xi@iapcm.ac.cn and pan_hao@iapcm.ac.cn
Received Date: 2025-07-13
Accepted Date: 2026-01-27

Available Online: 2026-05-01

Publish Date: 2026-05-28

Abstract

Abstract

The evolutionary mechanisms of Kelvin–Helmholtz instability at single-crystal copper–copper interfaces with initial sinusoidal perturbation under different tangential velocity discontinuities (0.5, 1.0, 2.0, and 3.0 km/s) are investigated through molecular dynamics simulations. Distinct characteristics of stable and unstable interface morphologies are identified. The interface contact length, rather than the perturbation amplitude, extracted by an edge detection method, is selected as an appropriate physical quantity to indicate the state of the interface. The interface is stable for a tangential velocity discontinuity of 0.5 km/s, since the contact length remains essentially unchanged, but it is unstable for the other three velocities, since the contact length increases continuously. The contact lengths of unstable interfaces exhibit distinctly different nonlinear growth patterns. The microstructural evolutions for stable and unstable interfaces are also revealed. Sparse distributions of microstructures, such as dislocations and stacking faults, are observed in a stable interface, whereas extensive propagation, indicating large areas of plastic deformation, is found in unstable interfaces. Furthermore, a large number of metastable phase atoms emerge during plastic deformation, and an amorphous belt whose thickness grows as the velocity increases is formed near unstable interfaces. A thicker amorphous belt corresponds to greater plastic work, which produces a wider high-temperature belt near the interface. It also leads to the formation of a thicker shear belt with a high gradient velocity profile, creating a dynamic condition to promote the instability and thus distort the interface.

Conflict of Interest
The authors have no conflicts to disclose.
Jianhao Shi: Conceptualization (equal); Investigation (equal); Methodology (equal); Validation (equal); Visualization (equal); Writing – original draft (equal); Writing – review & editing (equal). Xi Wang: Conceptualization (equal); Methodology (equal); Supervision (equal); Writing – review & editing (equal). Xiaomian Hu: Conceptualization (equal); Methodology (equal). Zihui Wu: Conceptualization (equal). Hao Pan: Conceptualization (equal); Methodology (equal); Supervision (equal); Writing – review & editing (equal).
Author Contributions
The data that support the findings of this study are available from the corresponding authors upon reasonable request.

FullText(HTML)

References(49)

References

[1]	T. B. Benjamin and T. J. Bridges, “Reappraisal of the Kelvin–Helmholtz problem. Part 2. Interaction of the Kelvin–Helmholtz, superharmonic and Benjamin–Feir instabilities,” J. Fluid Mech. 333, 327–373 (1997).10.1017/s0022112096004284
[2]	N. K. Sundaram, Y. Guo, and S. Chandrasekar, “Mesoscale folding, instability, and disruption of Laminar flow in metal surfaces,” Phys. Rev. Lett. 109, 106001 (2012).10.1103/physrevlett.109.106001
[3]	L. Kelvin, “Hydrokinetic solutions and observations,” London, Edinburgh Dublin Philos. Mag. J. Sci. 42(281), 362–377 (1871).10.1080/14786447108640585
[4]	V. H. Helmholtz, “On discontinuous movements of fluid,” London, Edinburgh Dublin Philos. Mag. J. Sci. 36(244), 337–346 (1868).10.1080/14786446808640073
[5]	R. E. Kelly, “The stability of an unsteady Kelvin–Helmholtz flow,” J. Fluid Mech. 22(3), 547–560 (1965).10.1017/s0022112065000964
[6]	T. Funada and D. D. Joseph, “Viscous potential flow analysis of Kelvin–Helmholtz instability in a channel,” J. Fluid Mech. 445, 263–283 (2001).10.1017/s0022112001005572
[7]	Y. Matsumoto and M. Hoshino, “Onset of turbulence induced by a Kelvin–Helmholtz vortex,” Geophys. Res. Lett. 31(2), L02807, (2004).10.1029/2003gl018195
[8]	K. A. Flippo, F. W. Doss, J. L. Kline, E. C. Merritt, D. Capelli et al., “Late-time mixing sensitivity to initial broadband surface roughness in high-energy-density shear layers,” Phys. Rev. Lett. 117, 225001 (2016b).10.1103/physrevlett.117.225001
[9]	E. C. Merritt, F. W. Doss, E. N. Loomis, K. A. Flippo, and J. L. Kline, “Modifying mixing and instability growth through the adjustment of initial conditions in a high-energy-density counter-propagating shear experiment on OMEGA,” Phys. Plasmas 22, 062306 (2015).10.1063/1.4922910
[10]	M. Vandenboomgaerde, M. Bonnefille, and P. Gauthier, “The Kelvin–Helmholtz instability in National Ignition Facility hohlraums as a source of gold-gas mixing,” Phys. Plasmas 23, 052704 (2016).10.1063/1.4948468
[11]	Q. Zhang, F. Wu, X. Yang, Y. Ma, Y. Cui et al., “Effects of Kelvin–Helmholtz instability on the material mixing in the double-cone ignition,” Phys. Plasmas 31, 032703 (2024).10.1063/5.0177219
[12]	A. Ravid, R. I. Citron, and R. Jeanloz, “Hydrodynamic instability at impact interfaces and planetary implications,” Nat. Commun. 12(1), 2104–2105 (2021).10.1038/s41467-021-22052-z
[13]	S. I. Blinnikov, R. I. Ilkaev, M. A. Mochalov, A. L. Mikhailov, I. L. Iosilevskiy et al., “Dynamics of supernova bounce in laboratory,” Phys. Rev. E 99, 033102 (2019).10.1103/physreve.99.033102
[14]	D. Capelli, D. W. Schmidt, T. Cardenas, G. Rivera, R. B. Randolph et al., “Development of indirectly driven shock tube for counter-propagating shear-driven Kelvin–Helmholtz experiments on the national ignition facility,” Fusion Sci. Technol. 70(2), 316–323 (2016).10.13182/fst15-229
[15]	A. Nassiri, B. Kinsey, and G. Chini, “Shear instability of plastically-deforming metals in high-velocity impact welding,” J. Mech. Phys. Solids 95, 351–373 (2016).10.1016/j.jmps.2016.06.002
[16]	Y. Zhang, S. S. Babu, C. Prothe, M. Blakely, J. Kwasegroch et al., “Application of high velocity impact welding at varied different length scales,” J. Mater. Process. Technol. 211(5), 944–952 (2011).10.1016/j.jmatprotec.2010.01.001
[17]	J. L. Althoff, A. Lorenz, S. Gies, C. Weddeling, G. Goebel et al., “Magnetic pulse welding by electromagnetic compression: Determination of the impact velocity,” Adv. Mater. Res. 966–967, 489–499 (2014).10.4028/www.scientific.net/AMR.966-967.489
[18]	A. Nassiri, G. Chini, A. Vivek, G. Daehn, and B. Kinsey, “Arbitrary Lagrangian–Eulerian finite element simulation and experimental investigation of wavy interfacial morphology during high velocity impact welding,” Mater. Des. 88, 345–358 (2015).10.1016/j.matdes.2015.09.005
[19]	G. H. S. F. L. Carvalho, I. Galvão, R. Mendes, R. M. Leal, and A. Loureiro, “Aluminum-to-steel cladding by explosive welding,” Metals 10(8), 1062 (2020).10.3390/met10081062
[20]	V. D. Linse and N. S. Lalwaney, “Explosive welding,” J. Met. 36(5), 62–65 (1984).10.1007/bf03338457
[21]	T. K. Coskun, B. Volgyi, and I. S. Nagl, “Investigation of aluminum-steel joint formed by explosion welding,” J. Phys.: Conf. Ser. 602(1), 012026 (2015).10.1088/1742-6596/602/1/012026
[22]	A. L. Mikhailov, “Shear instability of a boundary in metals,” Combust., Explos. Shock Waves 15(2), 250–253 (1979).10.1007/bf00790454
[23]	O. B. Drennov, A. L. Mikhailov, P. N. Nizovtsev, and V. A. Raevskii, “Instability of an interface between steel layers acted upon by an oblique shock wave,” Int. J. Impact Eng. 32, 161–172 (2005).10.1016/j.ijimpeng.2005.01.009
[24]	O. B. Drennov, “Effect of an oblique shock wave on the interface between metals,” J. Appl. Mech. Tech. Phys. 56(3), 377–380 (2015).10.1134/s0021894415030050
[25]	O. B. Drennov, A. I. Davydov, A. L. Mikhailov, and V. A. Raevskii, “Shear instability at the ‘explosion product–metal’ interface for sliding detonation of an explosive charge,” Int. J. Impact Eng. 32, 155–160 (2005).10.1016/j.ijimpeng.2005.01.006
[26]	X. Wang, X. M. Hu, S. T. Wang, H. Pan, and J. W. Yin, “Linear analysis of atwood number effects on shear instability in the elastic–plastic solids,” Sci. Rep. 11, 18049 (2021).10.1038/s41598-021-96738-1
[27]	X. Wang, X. M. Hu, S. T. Wang, H. Pan, and J. W. Yin, “Hydrodynamic Kelvin–Helmholtz instability on metallic surface,” Sci. Rep. 13, 2686 (2023).10.1038/s41598-023-29810-7
[28]	D. A. Rigney and S. Karthikeyan, “The evolution of tribomaterial during sliding: A brief introduction,” Tribol. Lett. 39, 3–7 (2010).10.1007/s11249-009-9498-3
[29]	K. Subramanian, J. H. Wu, and D. A. Rigney, “The role of vorticity in the formation of tribomaterial during sliding,” MRS Online Proc. Libr. 821, 330–335 (2004).10.1557/proc-821-p9.6
[30]	H. J. Kim, S. Karthikeyan, and D. Rigney, “A simulation study of the mixing, atomic flow and velocity profiles of crystalline materials during sliding,” Wear 267, 1130–1136 (2009).10.1016/j.wear.2009.01.030
[31]	S. Plimpton, “Fast parallel algorithms for short-range molecular dynamics,” J. Comput. Phys. 117(1), 1–19 (1995).10.1006/jcph.1995.1039
[32]	M. S. Daw and M. I. Baskes, “Semiempirical, quantum mechanical calculation of hydrogen embrittlement in metals,” Phys. Rev. Lett. 50, 1285–1288 (1983).10.1103/physrevlett.50.1285
[33]	S. M. Foiles, M. I. Baskes, and M. S. Daw, “Embedded-atom-method functions for the fcc metals Cu, Ag, Au, Ni, Pd, Pt, and their alloys,” Phys. Rev. B 33(12), 7983–7991 (1986).10.1103/physrevb.33.7983
[34]	X. W. Zhou, R. A. Johnson, and H. N. G. Wadley, “Misfit-energy-increasing dislocations in vapor-deposited CoFe/NiFe multilayers,” Phys. Rev. B 69(14), 144113 (2004).10.1103/physrevb.69.144113
[35]	C. Wang, J. Wang, J. Hu, S. Huang, Y. Sun et al., “Shear localization and mechanical properties of Cu/Ta metallic nanolayered composites: A molecular dynamics study,” Metals 12(3), 421 (2022).10.3390/met12030421
[36]	P. N. Mayer and A. E. Mayer, “Size distribution of pores in metal melts at non-equilibrium cavitation and further stretching, and similarity with the spall fracture of solids,” Int. J. Heat Mass Transfer 127, 643–657 (2018).10.1016/j.ijheatmasstransfer.2018.08.053
[37]	M. Yuasa, T. Nakazawa, and M. Mabuchi, “Atomic simulations of dislocation emission from Cu/Cu and Co/Cu grain boundaries,” Mater. Sci. Eng.: A 528(1), 260–267 (2010).10.1016/j.msea.2010.09.040
[38]	A. Stukowski, “Visualization and analysis of atomistic simulation data with OVITO—The open visualization tool,” Modell. Simul. Mater. Sci. Eng. 18(1), 015012 (2010).10.1088/0965-0393/18/1/015012
[39]	K. R. Mecke, “Morphological characterization of patterns in reaction-diffusion systems,” Phys. Rev. E 53, 4794 (1996).10.1103/physreve.53.4794
[40]	A. Aksimentiev, K. Moorthi, and R. Holyst, “Scaling properties of the morphological measures at the early and intermediate stages of the spinodal decomposition in homopolymer blends,” J. Chem. Phys. 112(13), 6049–6062 (2000).10.1063/1.481178
[41]	F. Chen, A. Xu, Y. Zhang, and Q. Zeng, “Morphological and non-equilibrium analysis of coupled Rayleigh–Taylor–Kelvin–Helmholtz instability,” Phys. Fluids 32, 104111 (2020).10.1063/5.0023364
[42]	P. A. Mlsna and J. J. Rodríguez, Gradient and Laplacian Edge Detection (Elsevier, 2009), pp. 495–524.
[43]
[44]
[45]	H. Xie, Z. Ma, H. Zhao, and L. Ren, “Atomic perspective of contact protection in graphene-coated high-entropy films,” Tribol. Int. 174, 107748 (2022).10.1016/j.triboint.2022.107748
[46]	D. Q. Doan, V. H. Nguyen, T. V. Tran, and M. T. Hoang, “Atomic-scale analysis of mechanical and wear characteristics of AlCoCrFeNi high entropy alloy coating on Ni substrate,” J. Manuf. Processes 85, 1010–1023 (2023).10.1016/j.jmapro.2022.12.009
[47]	A. Neogi and N. Mitra, “A metastable phase of shocked bulk single crystal copper: An atomistic simulation study,” Sci. Rep. 7, 7337 (2017).10.1038/s41598-017-07809-1
[48]	C. L. Kelchner, S. J. Plimpton, and J. C. Hamilton, “Dislocation nucleation and defect structure during surface indentation,” Phys. Rev. B 58(17), 11085 (1998).10.1103/physrevb.58.11085
[49]	P. G. Drazin and W. H. Reid, Hydrodynamic Stability, 2nd ed. (Cambridge University Press, 2004), pp. 14–22.